YSI EXO pH & ORP Sensor Replacement Module
User-replaceable tip for #599705 - EXO guarded pH/ORP sensor
- Các tính năng
- Các thông số kỹ thuật
Smart, cost-saving technology for water quality measurements.
Exhaustible reagents are stored in this replaceable module and can be swapped-out as needed. Electronics & data are stored separately in the smart sensor base. Grants long-term costs savings by eliminating the need to re-buy the entire sensor after the reagents are depleted (approximately 12-18 months for pH/ORP, depending on use).
Note:
- NOT for use in EXO2 systems with a central wiper installed.
- EXO sensors and modules are not backwards compatible with 6-Series sondes.
Specification | |
---|---|
Depth / Pressure Rating / Limit | 250m (820ft) |
Desktop Software Compatible | KOR for EXO |
Digital / Digital Sensors | Yes |
Equipment used with | 599705 |
Measurement Range | pH: 0 to 14 units |
ORP: -999 to 999 mV | |
Precision | pH: ±0.1 pH units within ±10°C of calibration temp; ±0.2 pH units for entire temp range |
(Within the environmental pH range of pH 4 to pH 10.) | |
ORP: ±?20 mV in Redox standard solutions | |
Resolution | pH: 0.01 units |
ORP: 0.1 mV | |
Response Time | pH: T63<3 sec, ORP: T63<5 sec |
Sampling | Yes |
Smart Sensors / Ports | Yes |
User Calibratable | Yes |
User Replaceable | Yes |
Warranty | 1 Year - Replaceable reagent modules for pH/ORP |
Waterproof | Yes, when installed |